Compare

You have selected 9 items to compare.

Next Page
 
CYL. CARBIDE ENDCUT BURR CUT 9 10X20MM product photo
2054822
KEN2100240K
LED PUSH BUTTON SWITCH 22MM SPDT LATCHING 250V IP65 IP67 RED product photo
2486490
811-8519
PLUS CLASS ZZ LOOSE PIN GAUGE 0.025" (+) product photo
2531144
2531144
Price

SIGN IN TO VIEW PRICE

SIGN IN TO VIEW PRICE

SIGN IN TO VIEW PRICE

Ratings
  • (0)
  • (0)
  • (0)
Short DescriptionCYL. CARBIDE ENDCUT BURR CUT 9 10X20MMLED PUSH BUTTON SWITCH 22MM SPDT LATCHING 250V IP65 IP67 REDPLUS CLASS ZZ LOOSE PIN GAUGE, 0.025
Long DescriptionCylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut 9 - Chipbreaker. Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.Push button switches typically have two key parts, an actuator and the contacts. The actuator will go all the way through the switch and into a thin cylinder at the bottom. Inside is a movable contact and spring. When the actuator is pressed, it touches with the stationary contacts, causing the action to take place.Make quick and accurate measurements with Vermont Gage pin gages. Measure hole sizes. Calculate distances between holes. Gages lot widths. Check locations. Use for Go/No-Go gaging. Size in micrometers and snap gages. These economical gages give you added wear life, unlike closer tolerance gages available on the market today. These replacement pins are perfect for updating your old sets and bringing them back into compliance. Each pin is marked with its size and direction of tolerance, individually packaged with a rust preventative and sealed in a "VCI" bag.
Brand/Manufacturer NameKENNEDYRS PROVERMONT
Manufacturing Part NumberKEN2100240K811-85192531144
Technical Attributes
Next Page