| Long Description | ABB motors are of the totally enclosed, three phase squirrel cage type, built to comply with international IEC and EN standards. Motors conforming to other national and international specifications are also available on request. All production units are certified to ISO 9001 international quality standard as well ISO 14000 environmental standard and confirm to all applicable EU Directives. ABB is one of only a handful of leading motor manufacturers in Europe to have a motor range to meet or exceed the minimum efficiencies stated in the highest level of the EU agreement of low voltage motors. These efficiency levels apply to 2and 4-pole, three phase squirrel cage induction motors rated for 400V, 50Hz with S1 duty class with the output 1.1 to 90 kW, which account for the largest volume on the market. ABB uses class F insulation systems, which, with temperature rise B, is the most common requirement among industry today. The use of Class F insulation with Class B temperature rise gives ABB products a 25° C safety margin. It can also be used to extend insulation life. For instance, a 10 K temperature reduction will extend the insulation life. | Customized to fit the individual user’s needs, the motors in ABB’s M2000 range are designed to meet the tough demands of modern industry. All M2000 motors comply with eff1, the EU’s highest efficiency class – which translates into cost savings and better environmental compatibility. Reliable, high quality products that are designed to last, ABB’s M2000 motors offer years of trouble-free operation, even in critical environments. To ensure equipment can be safety used in potentially explosive atmospheres, the hazardous areas where the equipment is installed must be known. Temperature class of equipment must be compared with the spontaneous ignition temperature of the gas mixtures concerned and its gas group must be known in specific cases (e.g. flame proof protection). Combustible dusts is hazardous as it can form potentially explosive atmospheres when dispersed in the air. Furthermore, layers of combustible dust may ignite and act as ignition source for an explosive atmosphere. They meet all relevant international standards, including IEC, European (EN), ATEX and NEMA, and the most important specification requirements for the oil and gas industry. | WS, Terminal marker, 12 x 6.5mm, Weidmueller, white. MultiMark terminal markers use an innovative composite material made from two components. The hard base contour of the marker snaps securely into the connector. The elastic surface finish makes the marker easy to mount. This specially punched material enables the strips to be stretched to accommodate the slight variations in spacing that tend to add up, especially with long terminal blocks. Another advantage: the excellent printability of the surface material guarantees durable and wear-resistant labelling. A print resolution of 300 dpi also produces a very legible script. |
