| Long Description | TeSys K control relay, 4 contacts (3NO+1NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V DC control circuit with no inrush consumption and equipped with a surge suppression device, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width) for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh). | The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2. | This is an inspection tool used to check a workpiece for the allowed tolerances. The term go and no go refers to the workpiece needs to pass a test(go) and fails the other(no go). It is most suitable to be used in production lines in factories. Using the minimum diameter of the hole as the Go and applying the tolerance PLUS insures that, if the Go plug goes through the hole, the hole is larger than the the minimum diameter. if the tolerance is applied minus on the Go , it is possible to accept product below the minimum stated diameter. Using the maximum diameter of the hole as the No-Go and applying the tolerance MINUS insures that, if the No-Go plug does not enter the hole, the hole diameter is smaller than the maximum diameter of the hole and in tolerance. If the tolerance is applied plus on the No-Go plug, it is possible to accept product above the maximum diameter of the hole. |
