Compare

You have selected 21 items to compare.

Next Page
 
DET3 SERIES EARTH RESISTANCE TESTER product photo
2051365
DET3TD
GO&NOGO PLAIN PLUG GAUGE, CLASS ZZ, 3.49MM-3.73MM product photo
2541128
2541128
PRESSURE MODULE 0-300PSI (0-20 BAR) (0-2000 KPA) product photo
2024163
750R27
Price

SIGN IN TO VIEW PRICE

SIGN IN TO VIEW PRICE

SIGN IN TO VIEW PRICE

Ratings
  • (0)
  • (0)
  • (0)
Short DescriptionDET3 SERIES EARTH RESISTANCE TESTERGO&NOGO PLAIN PLUG GAUGE, CLASS ZZ, 3.49MM-3.73MMPRESSURE MODULE 0-300PSI (0-20 BAR) (0-2000 KPA)
Long DescriptionThe Megger DET3TD earth and ground tester is used to test for some of the dangers and potential cost implications of earth spike disconnection. It features a large selector switch which makes the selection of 2-pole or 3-pole test easy with gloved hands. The kit is a ground resistance meter for measuring ground resistance, voltage and current for digital ground and bond testing. This is an inspection tool used to check a workpiece for the allowed tolerances. The term go and no go refers to the workpiece needs to pass a test(go) and fails the other(no go). It is most suitable to be used in production lines in factories. Using the minimum diameter of the hole as the Go and applying the tolerance PLUS insures that, if the Go plug goes through the hole, the hole is larger than the the minimum diameter. if the tolerance is applied minus on the Go , it is possible to accept product below the minimum stated diameter. Using the maximum diameter of the hole as the No-Go and applying the tolerance MINUS insures that, if the No-Go plug does not enter the hole, the hole diameter is smaller than the maximum diameter of the hole and in tolerance. If the tolerance is applied plus on the No-Go plug, it is possible to accept product above the maximum diameter of the hole.A family of 50 pressure modules covers pressure calibrations from 0 to 1 inH20 to 10,000 psi (2.5 mBar to 690 bar). Gage pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labeled for pressure range and media compatibility. All modules include NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and legacy 741, 743, 744, 701 and 702 calibrators).
Brand/Manufacturer NameMEGGERVERMONTFLUKE
Manufacturing Part NumberDET3TD2541128750R27
Technical Attributes
Next Page